How To Increase Bass On JBL Headphones: Easy Guide
To increase bass on JBL headphones in the United States, open the JBL Headphones app, connect your headphones, and raise the low-frequency bands in the Equalizer (EQ). If your model supports it, you can also select a bass preset such as Bass or Bass Boost. Start with small changes to avoid muddy sound, distortion, or listening levels that are too loud.
Introduction
JBL headphones can sound bass-light for several reasons. The EQ may be flat, the headphones may not seal well, the audio source may reduce low frequencies, or the music app may use its own sound settings.
The exact menu names depend on the JBL model and app version available in the United States. The steps below apply to many JBL wireless headphones and earbuds, but some older models may not support custom EQ.

Use the JBL Headphones App
The JBL Headphones app is usually the best way to adjust bass. It can save EQ settings to compatible JBL headphones, so the change may work across different music apps.
Steps to increase bass
- Install the JBL Headphones app from the Apple App Store or Google Play Store.
- Turn on your JBL headphones.
- Pair them with your iPhone or Android phone through Bluetooth.
- Open the JBL Headphones app.
- Select your headphones from the device list.
- Open Equalizer, Sound, or a similar audio menu.
- Choose a bass-focused preset if one is available.
- For more control, select Custom.
- Raise the lowest frequency bands by a small amount.
- Play a familiar song and listen for changes.
- Save the setting only after checking several songs.
The app layout can change between models and software versions. If you do not see an EQ option, your headphones may not support custom EQ through the app.
A good starting EQ
Use this as a starting point, not a fixed rule:
| Frequency range | Suggested change | Effect |
|---|---|---|
| 60β100 Hz | +2 to +4 dB | Adds deep kick and sub-bass |
| 150β250 Hz | +1 to +2 dB | Adds warmth and body |
| 400 Hz and above | 0 dB | Keeps vocals and detail more natural |
Raise one or two bands at a time. A large boost across every low-frequency band can make the sound thick rather than powerful.
Bass preset versus custom EQ
A bass preset is quick and easy. It may be useful if you want more impact without learning how EQ works.
A custom EQ gives you better control. For example, you can raise deep bass while leaving the midrange alone. This can make drums and electronic bass stronger without covering voices.

Adjust Bass in Your Phone or Music App
If the JBL app does not provide an EQ, check the device or music service you use. Some Android phones, Windows PCs, and music apps include their own equalizer.
On an Android phone
Android menus differ by brand. Look under settings such as:
- Sound
- Audio effects
- Equalizer
- Dolby Atmos
- Media sound
- Advanced sound settings
Choose a bass preset or raise the low bands slightly. Avoid using several bass boosts at the same time. For example, do not max out the JBL EQ, phone EQ, and music app EQ together.
On an iPhone or ipad
apple devices offer EQ settings in the Music app:
- Open Settings.
- Select Apps, then Music on newer iOS versions, or select Music directly on some older versions.
- Tap EQ.
- Choose a bass-focused preset, such as Bass Booster, if available.
This setting mainly affects Apple Music playback. It may not change audio from every other app.
In a music streaming app
Many streaming services include playback settings. Look for:
- Equalizer
- Playback
- Audio quality
- Normalize volume
- Sound check
Turn off volume normalization for a quick test if your music sounds less powerful than expected. Normalization changes loudness between tracks and does not always increase bass, but it can affect your impression of impact.
Use only one main EQ when possible. Multiple EQ systems can add too much gain and cause clipping.

Improve the Fit and Seal
A better ear seal can increase bass without changing the EQ. This is especially true for JBL in-ear headphones and earbuds.
Bass waves need a closed space near your ear. If outside air enters through a loose ear tip, deep bass can drop sharply. The result may sound thin, even when the headphones work correctly.
For JBL earbuds
Try these steps:
- Clean the ear tips and speaker grilles.
- Test each included ear tip size.
- Choose the size that seals your ear canal without pain.
- Insert the earbuds with a gentle twist.
- Check whether the bass changes when you press the earbuds inward.
- Use the JBL app fit test if your model includes one.
A good seal should feel secure but not painful. If the earbuds create pressure, irritation, or discomfort, use a different tip size.
For over-ear JBL headphones
Check the position of the ear cups. The cushions should surround your ears and sit evenly against your head.
Bass may drop if:
- Glasses create a gap under the ear pads.
- Hair blocks the cushion seal.
- The ear cups sit too far forward or back.
- The pads are worn or flattened.
- The headphones are not fully unfolded or adjusted.
Do not cover vents or microphones with tape or other materials. This can affect noise control and may damage the headphones.

Check the Audio Source and Connection
Before changing many settings, test the headphones with another phone or computer. This helps separate a headphone issue from a source issue.
Check these settings
- Confirm that the audio is not in mono mode.
- Turn off unusual hearing or accessibility filters.
- Check the balance slider and keep it centered.
- Disable a weak or overly bright EQ preset.
- Test a downloaded track instead of a low-quality stream.
- Check whether the music app has a separate EQ.
- Disconnect other Bluetooth audio devices.
- Update the JBL app and headphone firmware when an update is offered.
Bluetooth itself does not always make headphones sound bass-light. However, the phone, app, codec, EQ, or connection profile can affect playback.
If the sound changes when you move far from the phone, remove obstacles and test again. Keep the phone near the headphones during troubleshooting.
Test with several songs
Use at least three tracks:
- One with deep electronic bass.
- One with acoustic bass or kick drum.
- One with clear vocals.
A setting that sounds good on one heavily produced track may sound muddy on another. Adjust the EQ for a balanced group of songs, not just one recording.

Fix Weak Bass, Distortion, or Muddy Sound
More bass is not always better bass. If the headphones sound unclear after an EQ change, reduce the boost.
| Symptom | Likely cause | What to try |
|---|---|---|
| Bass is weak | Poor seal or flat EQ | Try another tip size and raise low EQ bands |
| Bass is muddy | Too much low-mid boost | Lower 150β300 Hz |
| Bass crackles | Clipping or damaged hardware | Reduce EQ gain and test another source |
| Vocals sound covered | Excessive bass or low-mid gain | Lower the 150β500 Hz area |
| Bass disappears when moving | Loose earbud fit | Improve the seal |
| One side sounds weak | Dirt, balance setting, or damage | Clean the grille and check left-right balance |
| Bass changed after an update | Preset or app setting changed | Recheck the EQ and reset the profile |
Reduce clipping
Clipping happens when the audio signal becomes too strong for the system to process cleanly. It can sound like crackling, harshness, or flattened bass.
Try this order:
- Lower the phone volume slightly.
- Reduce the EQ boost.
- Turn off extra bass effects.
- Test another song or app.
- Restart the headphones and phone.
If distortion remains with a flat EQ at a moderate volume, the headphones or source may have a hardware problem.
Reset the EQ
If you are unsure which setting caused the problem, return the EQ to Flat or Default. Then increase only the lowest band by a small amount.
This gives you a clean baseline. It also prevents several hidden sound effects from combining.

Choose Safe Listening Levels
Bass can make music feel quieter than it really is. That may lead you to raise the volume more than you should.
The National Institute on Deafness and Other Communication Disorders advises reducing exposure to loud sound and taking breaks. Warning signs include ringing in the ears, muffled hearing, or discomfort after listening.
Use these habits:
- Keep the volume at the lowest level that sounds clear.
- Take regular listening breaks.
- Lower the volume in noisy places instead of trying to overpower the noise.
- Stop listening if you feel pain or notice ringing.
- Do not use bass boost to compensate for a poor fit in a loud environment.
Noise-canceling headphones may help you hear music at a lower level in some settings, but they do not make loud listening safe by themselves. Hearing safety depends on both sound level and exposure time.

When Bass Boost Does Not Work
Bass boost may not work if the headphones do not support an adjustable EQ. Some JBL models only offer fixed sound modes, while others support custom settings through the JBL Headphones app.
Try this troubleshooting order:
- Confirm the exact JBL model name.
- Check that the JBL Headphones app recognizes it.
- Update the app if an update is available.
- Check for a headphone firmware update.
- Close other EQ or audio-effect apps.
- Test the headphones with a second phone.
- Reset the EQ to its default setting.
- Reset the headphones if the manual recommends it.
- Contact JBL support if the problem affects one side or remains after a reset.
A factory reset removes stored settings and pairing information on many models. The button sequence is not the same for every JBL headphone, so use the instructions for your exact model rather than guessing.
Signs of a hardware problem
Contact JBL or an authorized service provider when:
- One side has much less bass than the other.
- Distortion remains with no EQ boost.
- The problem began after liquid exposure or a fall.
- Cleaning the grille does not help.
- The issue occurs on several phones and audio sources.
- The battery, buttons, or charging system also behaves abnormally.
Do not open the headphones while they are under warranty. Opening the housing can damage seals and may affect warranty service.

Best Bass Settings for Common Listening Goals
There is no single best bass setting for every listener. Use the goal that matches your music and headphones.
| Goal | Suggested approach | Main risk |
|---|---|---|
| More deep bass | Raise 60β100 Hz slightly | Can cause clipping |
| More punch | Raise around 80β150 Hz | May make drums too strong |
| Warmer sound | Raise 100β250 Hz slightly | Can cover vocals |
| Clear bass with vocals | Raise deep bass, leave mids near flat | May sound less full |
| Strong bass at low volume | Use a small bass boost | May seem too strong at high volume |
For hip-hop, pop, EDM, and movie soundtracks, a small deep-bass boost may add impact. For podcasts, classical music, and acoustic recordings, too much bass can reduce speech and instrument detail.

Common Mistakes to Avoid
Avoid these mistakes when trying to increase bass on JBL headphones:
- Maxing every EQ slider: This often creates distortion rather than clean bass.
- Ignoring the ear tip fit: A poor seal can remove more bass than any EQ can restore.
- Using several bass boosters: The JBL app, phone, and music app may all add gain.
- Testing only one song: One track may hide problems in the setting.
- Confusing loudness with bass: A louder signal can seem more powerful even when its bass balance is unchanged.
- Cleaning with liquid: Moisture can damage the drivers and electronics.
- Blocking vents: This can affect sound and noise-control functions.
- Ignoring hearing discomfort: Ringing or pain is a reason to stop and lower exposure.
The cleanest result usually comes from a good fit, one moderate EQ adjustment, and a safe listening level.

Key Takeaways
- Use the JBL Headphones app when your model supports custom EQ.
- Start by raising the lowest EQ band by about 2 to 4 dB.
- Improve the ear seal before applying a large bass boost.
- Use only one main EQ system at a time.
- Reduce the boost if the sound becomes muddy or distorted.
- Test several songs and, if possible, another phone.
- Stop listening if you notice pain, ringing, or muffled hearing.
FAQs
Can I increase bass on JBL headphones without the JBL app?
Yes. You can use the EQ in a compatible Android phone, computer, or music app. However, the available controls depend on the device and app. Some JBL headphones also have fixed sound modes that cannot be changed.
Why do my JBL earbuds have no bass?
The most common causes are a poor ear tip seal, blocked speaker grilles, a flat EQ, or a source setting that reduces low frequencies. Test different ear tips first, then check the EQ.
Does bass boost damage JBL headphones?
A moderate bass boost should not normally damage the headphones. Excessive gain can cause clipping and may make the drivers work harder. Keep the volume reasonable and reduce the EQ if you hear crackling.
Why does one JBL earbud have less bass than the other?
Check the ear tip fit, clean both grilles carefully, and check the phoneβs left-right balance. If one side remains weak on several devices, the earbud may need service.
How do I reset my JBL headphones after changing the EQ?
Many models can be reset through a button combination, but the process varies. Use the support guide for the exact JBL model. If you only want to remove the sound change, set the EQ to Flat or Default first.
Is a JBL bass preset better than a custom EQ?
A preset is easier and may sound good immediately. A custom EQ is better when you want to raise deep bass without adding too much low-mid sound. The better choice depends on your headphones, music, and personal preference.
Conclusion
The simplest way to increase bass on JBL headphones is to improve the fit and make a small EQ change in the JBL Headphones app. Start with a modest boost in the lowest frequency bands, test several songs, and reduce the setting if vocals become dull or the bass distorts.
If the change does not work, test another audio source and inspect the ear tips, speaker grilles, balance settings, and app controls. A persistent one-sided or distorted sound may indicate a hardware problem rather than an EQ issue.
